For heavy-, medium- and light-duty trucks, construction and agricultural cabs

The R-6100 is the ultimate rooftop air conditioner design. Red Dot went the extra mile in designing a lightweight, high-capacity unit with a styled low profile that fits the aerodynamic truck designs of today. A sloping front rides comfortably over center marker lights. This is a must when roof space is minimal or air shields are used.

A low-profile plenum protrudes barely 1.5 inches into the cab and blends easily into the headliner, leaving ample headroom. Frigid, high-velocity air can be directed 360 degrees through the large diffusers located directly below the double blowers. Also featured is a cab air filter incorporated into the plenum.

The heavy-duty design contains tube and fin coil construction, high-capacity receiver drier and Red Dot Trinary System protection switch. The Trinary switch extends condenser motor life and guards against component failure. Should the R-6100 ever need service, only two outside bolts need be removed to access any component. The R-6100 is perfect for most truck applications, especially COE's where space in the cab is limited.


BTUs

Cooling -- 16,000 BTU/hr with 36º F (4,032 kcal/h with 2.2º C) refrigerant temp. and 80º F (26.7º C) wet bulb entering air
Air Flow

265 CFM (450 m3/h)
Weight

44 lbs. (20 kg)
Condenser Coil

The coil is aluminum fin and copper tube construction. This material selection, which includes a tube of .022" (6 cm) wall thickness, results in an effective, lightweight, and rugged coil.
Motors

The motor is a permanent magnet type selected for its extended life. The motor is sealed and a slinger ring and hub cap added for weather protection. The fan is aluminum with heavy duty spider and riveted blades.
Current Draw

33 amps @ 13.6 VDC (includes 4 amps for A/C clutch);
16.5 amps @ 27.2 VDC (includes 2 amps for A/C clutch)
Models

R-6100-0 (12 volt),
R-6100-0-24 (24 volt)